25 products
Activated with fire exposure, Metacaulk MC 150+ is a general fire-rated sealant for construction joints and through penetrations. Prevents spread of flames/smoke/hot gases/water. All systems rated for up to 4 hours as per ASTM E814 (UL1479) & ASTM E1966 (UL 2079) test standards.
Enquire
Metacaulk 1000 is a 1-component, general fire-rated sealant/smoke seal for construction joints & through-penetrations. Cures to elastomeric seal suited to dynamic motion. Stops flames/smoke/hot gas/water moving through joints & through penetrations.
Enquire
All grades of Metacaulk 1200 are single-component, general-use fire-rated sealant for construction joints. Cures to elastomeric membrane seal suitable for dynamic movement areas. Prevents spread of flames/smoke/hot gas/water through joint openings.
Enquire
RectorSeal Smoke and Acoustic Sealant is high-grade acrylic latex sealant that permanently seals penetrations, membrane openings, & static/dynamic joints in smoke & sound-rated assemblies. Tested to ASTM E84, ASTM E90, ASTM E1399, ASTM C834.
Enquire
Metacaulk Industrial Cable Coating is a ready-to-use, heavy duty spray coating which is ablative & made to impede vertical/horizontal fire propagation along grouped/single comm. or power cables. Made for industrial/utility applications.
Enquire
Metacaulk 835+ is a 1-component, fire-rated elastomeric silicone sealant for through penetration firestops. Prevents flames/smoke/gas/water spreading through penetration openings. Silicone based - use in systems where dynamic movement is expected.
Enquire
RS 136 is a 1-component, incombustible fire-block, draft stop caulk. Not for use in continuous vibration environments. Do not dilute. Store between 35°F & 100°F for minimum 2 years shelf life. Best protected from freezing- thaw before use if frozen.
Enquire
Metacaulk 950 is a 1-part fire-rated sealant for through-penetration firestop systems. Prevents flames/smoke/gas/water moving through penetrations. Systems rated for 1, 2 & 3 hrs. according to ASTM E814 (UL 1479), ASTM E1966 (UL 2079) & ULC CAN 4-S115M test standards.
Enquire
Metacaulk Composite Sheet is hard fire-resistive panel for sealing penetrations/restoring fire rating to floors/ceilings/walls with penetrating openings. Intumescent material bonded to steel sheet that chars/slows heat transfer when exposed to fire.
Enquire
Adjustable intumescent collar assembly that restores the fire rating of wall and floor penetrations carrying combustible plastic pipes.
Enquire
Metacaulk Firestop Pillows help prevent the spread of flames and hot gases through openings. They are made for use in large openings with cables, cable trays, blank openings, or multiple penetrating items. They are reusable, easy to install, and have been tested in accordance with ASTM E814 (UL1479), providing up to a 3-hour fire resistance rating. Available in 2" and 3".
Enquire
Metacaulk Intumescent Sleeve is a firestop seal for several types of plastic pipe & hard non-metal conduit installations. Ideal for flammable pipes penetrating the uneven concrete fluted deck assembly. No need to firestop both penetration sides.
Enquire
Provides through floor penetration firestop protection for both plastic and metal pipes and all types of cabling
Enquire
Metacaulk Fire Rated Mortar is a rapid-hardening gypsum/cement compound with the best combination of workability, strength & fire resistance. When mixed with clean water to a suitable consistency it forms a rigid, gas tight, fire-resistant seal.
Enquire
Metacaulk Pipe Collars are prefabricated for open/closed through-penetration firestop systems with 11/2-6" (38 - 152 mm) plastic pipe. Easy lock mechanism assures easy install. Collar design greatly cuts time/expense compared to competitors collars.
Enquire
A flexible firestop material used in concrete/masonry control floor & wall joints up to 2" (51 mm) wide. Forms a strong char preventing passage of flame, smoke, & hot gases between control joints. Can use with plastic pipe penetrations.
Enquire
Metacaulk Wrap Strip is a highly intumescent firestop material strip mainly for plastic & insulated pipe applications. When exposed to fire, it expands & forms a very hard char to seal the penetration stopping the passage of flames & hot gases.
Enquire
Metacaulk Putty is a moldable non-curing 1-component fire-rated material for through penetration firestop systems. Intumesces when exposed to fire, forming an insulating char. Prevents spread of flames/smoke/gas/water through penetrations.
Enquire
Metacaulk Putty is a moldable non-curing 1-component fire-rated material for through penetration firestop systems. Intumesces when exposed to fire, forming an insulating char. Prevents spread of flames/smoke/gas/water through penetrations.
Enquire
Metacaulk BoxGuard delivers ready-to-install firestop protection for metallic electrical boxes. A factory pre-cut opening eliminates on-site drilling or cutting, while peel-and-stick, highly intumescent material helps block flame spread and limit heat transfer. Available in Single, Double, and Double for 5.S box configurations.
Enquire
Metacaulk Cover Guard is a 1-piece fire-rated gasket for meeting the "24-in rule" in electrical boxes. When exposed to heat, intumescent material expands/forms a char to seal opening, prevent flame spread & limit heat transfer to unexposed areas.
Enquire
For tying wiring harnesses and cable looms
EnquireMetacaulk Composite Sheet is hard fire-resistive panel for sealing penetrations/restoring fire rating to floors/ceilings/walls with penetrating openings. Intumescent material bonded to steel sheet that chars/slows heat transfer when exposed to fire.
Enquire